Descripción
This high volume intersection completely lacks any pedestrian signals. The pedestrian is left to try to sprint across and watch for turning/high speed cars on this road. Sight lines are a real issue as cars park right up to the intersection. Is a real issue for anyone with mobility issues. Pretty much every other intersection in this area has pedestrian signals.
4 Comentars
Reconocido SCormier (Oficial verificado)
SCormier (Oficial verificado)
Fix BTV (Usuario registrado)
There are no pedestrian lights and the light has no delay. As soon as one light turns red the other turns green giving no lead time for pedestrian to get into the road. It is up to the pedestrian to look at lights and guess when they will change. For example heading up the hill on College St the traffic light is green for College St traffic. A pedestrian loses sight of what the signal is a few feet before entering the cross walk. The light can change without the pedestrian being able to see it, traffic starts flowing immediately the other way and then the pedestrian is at risk often with aggressive motorist honking and swerving around them. In the morning the traffic heading South on Willard backs from the Main St light and cars sit in the intersection across the crosswalks also preventing a pedestrian from safely crossing.
Look at the other intersections around here - Main and Willard, College and South Propspect, Pearl and Willard, College and South Union - they all have pedestrian signals.
Cerrado SCormier (Oficial verificado)
This subject comes up every once in a while. Nearby signals have pedestrian signals, this one does not. Why not? Different characteristics, conditions, and operations.
The characteristics here, or the static items in place, are a pair of four-way signals, suspended diagonally over the roadway. This central, aerial placement makes them highly visible both to drivers and pedestrians. Other typical signal layouts put a pair of signals at the far side of each approach, making the viewing of them sometimes difficult, depending on the relationship to adjacent sidewalks. Such is not the case here.
Conditions, meaning the dynamic happenings here, are predominantly straight through traffic flows north-south, alternating with east-west. There are turning movements. But unlike many other intersections, observed turns here tend to be a small minority of what happens. Most traffic stays on Willard Street or on College Street. Not that there are no turns, just that they are observed to be a minority of the mix, which works well for this location.
Traffic volumes tend to be less than nearby intersections. This is indeed US Route 7, but this portion of Route 7 is bounded on the north and south by two actuated signals at Pearl and Main Streets, respectively, which treat the north/south approaches as side streets, or minor appraches. It would be highly unusual for Willard volumes to rise to the same levels as Pearl and Main, because the major green time there is not for the north/south direction.
There are a fair number of pedestrians here. More than some intersections, less than others. The key question is whether there is any ongoing difficulty in crossing here. Observations made over many years show this is a fairly easy intersection to navigate. It does not jump out as difficult, as can sometimes be the case even at intersections with full, four-way pedestrian signals and moderate turning movements.
The operation here is pre-timed. The signal does not "see" or respond to traffic in any way. It runs a fixed cycle length over and over all throughout the day. The non-actuated, fixed cycle makes sense being between two actuated signals at Pearl and Main. Cars arrive from each direction with a certain regularity, and there is somewhat of a north/south progression along Willard Street. Running a fixed cycle, there is no need for pedestrian buttons. The signal changes every time, whether anyone is there or not.
Putting in pedestrian signals is a huge, expensive undertaking. We would have to install at least 4, and as many as 8 poles to get the proper placement for each ped signal. This requires 3 underground street crossings, to "connect the dots" with electrical conduit where there is none now. Such a project would cost in the neighborhood of say $40,000. If the electric department, telephone and cable companies were to move their equipment from wood poles to underground facilities, we might gain some cost efficiencies by sharing an expensive, open-cut trench. If the surrounding utilities went underground, there might be a desire to move the signal to a post-top design for aesthetic reasons.
To sum up, installing pedestrian signals at Willard & College is not easy or inexpensive. Ultimately, it is a political decision that should be made with awareness of other pressing issues. In the present situation, where we have aerial utilities (wood poles), moderate traffic volume, low turn movements, highly visible signals, and fixed cycle operation, installing ped signals here does not appear to be as warranted as at some other locations.
For more info please contact Dave - Traffic Signal Tech 865-7269 - this issue closed